Qingdao hesiway
Industrial Co., Ltd.
Industrial Co., Ltd.
TEL.(86) 186 6170 8309
TEL.(86) 186 6170 8309
Qingdao hesiway
Industrial Co., Ltd.
Hesiway News
Release time:2023.01.09
Publisher:alloy powder manufacturer
The production development of alloy powder manufacturers has a lot to do with the quality of the screening work. If the basic screening work is done well, then the development of alloy powder manufacturers will be better and better.
For alloy powder manufacturers, the alloy powder produced is usually produced by atomization powder making method, and is a completely alloyed powder composed of solid solution and intermetallic compound. All alloys that can be melted and liquefied can be made into powder by atomization pulverization.
Alloy powder screening:
Coarse particle screening and impurity removal generally use ordinary three-dimensional rotary vibrating screen to meet the requirements, and superfine particle alloy powder screening uses ultrasonic vibrating screen to meet the requirements. If there are flammable and explosive factors in the product, it is necessary to consider the closed powder screening system.
The working principle of the alloy powder vibrating screen: the vibrating motor is used to work directly to generate exciting force. When the exciting force acts on the sieve body, the whole working part will rotate and vibrate up and down, and the alloy powder will present the motion trajectory as shown in the figure on the sieve surface for sieving work, and then the alloy powder will flow from the discharge port according to the route to be taken. Discharge and complete the screening work.
Qingdao Hesiway Industrial Co., Ltd. is a foreign trade company established by Qingdao Juxinyuan Industry and Trade Co., Ltd. to better serve foreign customers. The company specializes in the production of tungsten series products, and the particle size can be customized according to customer requirements. If you want to know more information about alloy powder manufacturers, you are welcome to come to consult.
Company name：Qingdao Hesiway industrial Co., Ltd.
Mobile：186 6399 7859
Fax：86 0532 8766 3689
Tel：86 0532 8481 9182
Whatsapp：0086 - 17753259059
Facebook：0086 - 17753259059
Email：Develn@hswmatel.com
Company homepage：www.hswmatel.com
Address：Jihongtan Beiwan Industrial Park, Chengyang,District, Qingdao, Shandong, China
Tungsten pellets are solid metal products made from pure tungsten
They have high density, high melting point, and good electrical conductivity
Widely used in metallurgy, electronics, and high-temperature processing
Our tungsten pellets meet strict industry standards for reliability
The "All-Rounder" in the Micro World: Amazing Properties of Nano-Tungsten Trioxide
Tungsten carbide powder (chemical formula: WC) is a key industrial material
It has extreme hardness, high melting point, and excellent wear resistance
Widely used in cutting tools, hardmetals, and engineering components
Our WC powder meets international quality standards for various industrial applications
Tungsten powder, a core product of Hesiway, is a key raw material in various high-tech and industrial fields, known for its high melting point, density, and excellent mechanical properties.
It plays a vital role in the manufacturing of tungsten alloys, hardmetals, and electronic components, with Hesiway ensuring high-quality production.
The processing of ferroalloy powder can be carried out through the following steps:Raw material preparation: Select appropriate ferroalloy powder, such as pure iron, low carbon steel, high carbon steel, etc., and prepare processing equipment, such as hydraulic press, die, grinding equipment, etc.
The advantages of resin tungsten powder mainly include:High density: Resin tungsten powder has a high density, which helps to improve product quality and performance.Good plasticity: Resin tungsten powder has good plasticity and can be processed into products of various shapes and specifications.
The molding process of alloy powder generally includes injection molding and compression molding.The press molding process requires the use of hydraulic press equipment for pressing.
High-purity tungsten carbide particles have the following performance characteristics:High hardness: The hardness of high-purity tungsten carbide particles is very high, reaching above HRA93.0, which makes it have excellent wear resistance and impact resistance.
The applications of high-purity tungsten powder mainly include the following fields:Cemented carbide preparation: High-purity tungsten powder is an important raw material for the production of cemented carbide and can be used to manufacture carbide tools such as turning tools, milling cutters, drill bits and molds.
Recommended products
Cu Fe Pb As Sb Bi Sn Zn S Hydrogen loss Acid >99.8% 0.01 0.0263 0.002 0.002 0.001 0.004 0.002 0.004 0.35 0.045
Powder:WC-12Ni
Preparation:Agglomeration and sintering
GRanularity(μm):45-15
Grade:JFGHWC40Ni
Total carbon T.C:3.7-3.96
Free carbon F.C:≤0.06
1. Tungsten powder has high purity, uniform particle size and good dispersion. It is an important raw material for the production of tungsten carbide powder
Tungsten carbide powder is the main raw material for processing cemented carbide and has more excellent properties.
2. Tungsten powder not only has high hardness, but also has the characteristics of wear resistance, corrosion resistance and high temperature resistance.
3. The melting point of tungsten is 3400 ºC. Boiling point 5555 ºC, insoluble in water, strong acid and alkali resistance.
4.The hardness of tungsten is the hardest among metals. The hardness of sintered tungsten rod is 200 ~ 250 and that of tungsten rod passing through rotary hammer is 350 ~ 400.
Sieving particle size: 60～325 mesh
Appearance: Granular, steel gray, with good fluidity. ,
Loose packing density: 7.3～8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size：>30μm
Molecular formula: W
Molecular weight: 183.85
Physical properties: a bright gray particles;
Chemical formula: FeW
Physical properties: the surface shall be smooth and clean, and the section and surface shall be free of significant non-metallic inclusions and rust spots.
Appearance: granular, steel gray, with good fluidity
Loose density: 7.3 ~ 8.9g/cm3
Compaction density: 9.0 ~ 10.5g/cm3
Hall flow rate: ≤ 12 S / 50g
Fischer particle size: > 30 μ m
Sintering temperature: 760 ~ 810 ℃
Hardness: 107 ~ 110 HRB
Chemical formula: WC
Physical properties: rigid gray metal powder.
Molecular formula: WO3
Molecular weight: 231.86
Specific gravity: 7.16g/cm3
Appearance: Light yellow triclinic powder crystals, light yellow heavy powder, which turns dark orange when heated, and restores its color when cold. When the temperature is higher than 740℃, it will transform into orange tetragonal crystals, which will return to the original state after cooling.
Chemical formula: eutectic, two-phase tungsten carbide (WC • W2C) WC
Appearance: dark gray powder, multi angular smooth particles.
Features: high temperature resistance, super wear resistance and impact resistance.
Cu Fe Pb As Sb Bi Sn Zn S Hydrogen loss Acid >99.8% 0.01 0.0263 0.002 0.002 0.001 0.004 0.002 0.004 0.35 0.045
Powder:WC-12Ni
Preparation:Agglomeration and sintering
GRanularity(μm):45-15
Grade:JFGHWC40Ni
Total carbon T.C:3.7-3.96
Free carbon F.C:≤0.06
1. Tungsten powder has high purity, uniform particle size and good dispersion. It is an important raw material for the production of tungsten carbide powder
Tungsten carbide powder is the main raw material for processing cemented carbide and has more excellent properties.
2. Tungsten powder not only has high hardness, but also has the characteristics of wear resistance, corrosion resistance and high temperature resistance.
3. The melting point of tungsten is 3400 ºC. Boiling point 5555 ºC, insoluble in water, strong acid and alkali resistance.
4.The hardness of tungsten is the hardest among metals. The hardness of sintered tungsten rod is 200 ~ 250 and that of tungsten rod passing through rotary hammer is 350 ~ 400.
Sieving particle size: 60～325 mesh
Appearance: Granular, steel gray, with good fluidity. ,
Loose packing density: 7.3～8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size：>30μm
Molecular formula: W
Molecular weight: 183.85
Physical properties: a bright gray particles;
Chemical formula: FeW
Physical properties: the surface shall be smooth and clean, and the section and surface shall be free of significant non-metallic inclusions and rust spots.
Appearance: granular, steel gray, with good fluidity
Loose density: 7.3 ~ 8.9g/cm3
Compaction density: 9.0 ~ 10.5g/cm3
Hall flow rate: ≤ 12 S / 50g
Fischer particle size: > 30 μ m
Sintering temperature: 760 ~ 810 ℃
Hardness: 107 ~ 110 HRB
Chemical formula: WC
Physical properties: rigid gray metal powder.
Molecular formula: WO3
Molecular weight: 231.86
Specific gravity: 7.16g/cm3
Appearance: Light yellow triclinic powder crystals, light yellow heavy powder, which turns dark orange when heated, and restores its color when cold. When the temperature is higher than 740℃, it will transform into orange tetragonal crystals, which will return to the original state after cooling.
Chemical formula: eutectic, two-phase tungsten carbide (WC • W2C) WC
Appearance: dark gray powder, multi angular smooth particles.
Features: high temperature resistance, super wear resistance and impact resistance.
contact Hesiway
Mobile.186 6170 8309
Tel.86 0532 8481 9182
Address.Jihongtan Beiwan Industrial Park, Chengyang,District, Qingdao, Shandong, China
Fax.86 0532 8766 3689
Whatsapp.0086-177 5325 9059
Company homepage.www.hswmatel.com
Online Message
