The alloy processing market has always been the top priority in the industry. We are also very cautious in the selection of materials and partners. Just as when we selected tungsten powder processing enterprises, our market research on heswell lasted nearly two months.
Division in the selection of all kinds of tungsten powder processing enterprises, are usually very careful, there are many tungsten powder enterprises in the market, before we have failed, to the development of the enterprise also caused a lot of losses.
The cooperation with Qingdao Hesway is a completely reassuring and anxiety-free experience. And acquaintance, is in the network of numerous praise.
With the cooperation with Qingdao Hesway, my company has made a very correct decision. Through the introduction of industry partners, we first know Hesway. After a detailed conversation with Hesway, we find that Hesway is the partner we have always wanted to find, so we sign a contract and cooperate.
Before our cooperation with Qingdao Hesway, also has experienced too much tungsten powder production enterprises of the same type, but because of various reasons, even under the condition of product quality can guarantee, we also have met a lot of problems, since then, in choosing a partner, our company is very cautious.
Hesway is our company has always been a very reliable partner, is a strength, quality, reputation is very good enterprises. During the three years of cooperation with Hesway, our company has really felt the professional of Hesway. Whether it is the control of product quality or the management of the overall service quality of the enterprise, our company has been pleasantly surprised.
Recommended products
Total carbon T.C:3.8-3.88
Free carbon F.C:≤0.06
Ni:28.8-35.5
Powder:WC-12Ni
Preparation:Agglomeration and sintering
GRanularity(μm):45-15
Grade:JFGHWC40Ni
Total carbon T.C:3.7-3.96
Free carbon F.C:≤0.06
1. Tungsten powder has high purity, uniform particle size and good dispersion. It is an important raw material for the production of tungsten carbide powder
Tungsten carbide powder is the main raw material for processing cemented carbide and has more excellent properties.
2. Tungsten powder not only has high hardness, but also has the characteristics of wear resistance, corrosion resistance and high temperature resistance.
3. The melting point of tungsten is 3400 ºC. Boiling point 5555 ºC, insoluble in water, strong acid and alkali resistance.
4.The hardness of tungsten is the hardest among metals. The hardness of sintered tungsten rod is 200 ~ 250 and that of tungsten rod passing through rotary hammer is 350 ~ 400.
Sieving particle size: 60~325 mesh
Appearance: Granular, steel gray, with good fluidity. ,
Loose packing density: 7.3~8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size:>30μm
Molecular formula: W
Molecular weight: 183.85
Physical properties: a bright gray particles;
Chemical formula: FeW
Physical properties: the surface shall be smooth and clean, and the section and surface shall be free of significant non-metallic inclusions and rust spots.
Appearance: granular, steel gray, with good fluidity
Loose density: 7.3 ~ 8.9g/cm3
Compaction density: 9.0 ~ 10.5g/cm3
Hall flow rate: ≤ 12 S / 50g
Fischer particle size: > 30 μ m
Sintering temperature: 760 ~ 810 ℃
Hardness: 107 ~ 110 HRB
Chemical formula: WC
Physical properties: rigid gray metal powder.
Molecular formula: WO3
Molecular weight: 231.86
Specific gravity: 7.16g/cm3
Appearance: Light yellow triclinic powder crystals, light yellow heavy powder, which turns dark orange when heated, and restores its color when cold. When the temperature is higher than 740℃, it will transform into orange tetragonal crystals, which will return to the original state after cooling.
Chemical formula: eutectic, two-phase tungsten carbide (WC • W2C) WC
Appearance: dark gray powder, multi angular smooth particles.
Features: high temperature resistance, super wear resistance and impact resistance.
Molecular formula: WC-Co
Appearance: granular, steel gray, with good fluidity
Loose packing density: 7.3~8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size: >30μm
Total carbon T.C:3.8-3.88
Free carbon F.C:≤0.06
Ni:28.8-35.5
Powder:WC-12Ni
Preparation:Agglomeration and sintering
GRanularity(μm):45-15
Grade:JFGHWC40Ni
Total carbon T.C:3.7-3.96
Free carbon F.C:≤0.06
1. Tungsten powder has high purity, uniform particle size and good dispersion. It is an important raw material for the production of tungsten carbide powder
Tungsten carbide powder is the main raw material for processing cemented carbide and has more excellent properties.
2. Tungsten powder not only has high hardness, but also has the characteristics of wear resistance, corrosion resistance and high temperature resistance.
3. The melting point of tungsten is 3400 ºC. Boiling point 5555 ºC, insoluble in water, strong acid and alkali resistance.
4.The hardness of tungsten is the hardest among metals. The hardness of sintered tungsten rod is 200 ~ 250 and that of tungsten rod passing through rotary hammer is 350 ~ 400.
Sieving particle size: 60~325 mesh
Appearance: Granular, steel gray, with good fluidity. ,
Loose packing density: 7.3~8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size:>30μm
Molecular formula: W
Molecular weight: 183.85
Physical properties: a bright gray particles;
Chemical formula: FeW
Physical properties: the surface shall be smooth and clean, and the section and surface shall be free of significant non-metallic inclusions and rust spots.
Appearance: granular, steel gray, with good fluidity
Loose density: 7.3 ~ 8.9g/cm3
Compaction density: 9.0 ~ 10.5g/cm3
Hall flow rate: ≤ 12 S / 50g
Fischer particle size: > 30 μ m
Sintering temperature: 760 ~ 810 ℃
Hardness: 107 ~ 110 HRB
Chemical formula: WC
Physical properties: rigid gray metal powder.
Molecular formula: WO3
Molecular weight: 231.86
Specific gravity: 7.16g/cm3
Appearance: Light yellow triclinic powder crystals, light yellow heavy powder, which turns dark orange when heated, and restores its color when cold. When the temperature is higher than 740℃, it will transform into orange tetragonal crystals, which will return to the original state after cooling.
Chemical formula: eutectic, two-phase tungsten carbide (WC • W2C) WC
Appearance: dark gray powder, multi angular smooth particles.
Features: high temperature resistance, super wear resistance and impact resistance.
Molecular formula: WC-Co
Appearance: granular, steel gray, with good fluidity
Loose packing density: 7.3~8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size: >30μm
contact Hesiway
Mobile.186 6170 8309
Tel.86 0532 8481 9182
Address.Jihongtan Beiwan Industrial Park, Chengyang,District, Qingdao, Shandong, China
Fax.86 0532 8766 3689
Whatsapp.0086-177 5325 9059
Company homepage.www.hswmatel.com
Online Message