Qingdao hesiway
Industrial Co., Ltd.
Industrial Co., Ltd.
TEL.(86) 186 6170 8309
TEL.(86) 186 6170 8309
Qingdao hesiway
Industrial Co., Ltd.
Hesiway News
Release time:2023.08.17
Publisher:high purity tungsten powder
High-purity tungsten powder is a basic material that is very commonly used now, because it has many advantages, so it can be used in a wide range. In recent years, the market demand for high-purity tungsten powder is also increasing. Of course, any product will have many problems when it is used, which requires more attention.
When using high-purity tungsten powder, remember to penetrate into the wall. After entering the cable protection tube of the switchboard cabinet, it must be arranged neatly. The area of the tube opening should not be less than 50 to 80 mm. Then the wire box and the lamp must have a hanger when installing. This is done to prevent bending due to the important role of the lamp connection. These are very important things, so the staff must pay more attention and operate strictly according to the requirements, so that other things cannot happen. For the staff, it is necessary to understand these in advance when installing high-purity tungsten powder. Only then will there be no problems. High-purity tungsten powder is widely used as gate electrode material, wiring material and shielding metal material of semiconductor large-scale integrated circuits.
The pipelines of high-purity tungsten powder should be connected with the threads, and the number of threads should be no less than 5. The open distribution pipelines inside the high-purity tungsten should be horizontal and vertical, and the discharge should be neat. The fixation should also be placed evenly. Then the main wires that have been bent and threaded are fixed on the bracket. The buried cables cannot pass through the foundation of the equipment, and must be protected when passing through the foundation of the building. The concealed protection pipe should reduce bending during the wiring, the distance between the concrete protection pipe embedded in the wall and the building should be less than 15mm, and the depth should be about 0.7m. If it is used indoors, the environment of high-purity tungsten and the place with high temperature, dust, vibration and fire hazard. It can be used in some damp places. Of course, it can't be particularly damp, and it can't be used in acid-base corrosive places.
Qingdao Hesiway Industrial Co., Ltd. is a foreign trade company established by Qingdao Juxinyuan Industry and Trade Co., Ltd. to better serve foreign customers. The company specializes in the production of tungsten series products, and the particle size can be customized according to customer requirements. If you want to know more about high-purity tungsten powder, welcome to consult usCompany name：Qingdao Hesiway industrial Co., Ltd.
Mobile：186 6399 7859
Fax：86 0532 8766 3689
Tel：86 0532 8481 9182
Whatsapp：0086 - 17753259059
Facebook：0086 - 17753259059
Email：Develn@hswmatel.com
Company homepage：www.hswmatel.com
Address：Jihongtan Beiwan Industrial Park, Chengyang,District, Qingdao, Shandong, China
As an important intermediate product of transition metal tungsten, tungsten powder has strong reducing properties and is often used to produce tungsten products such as tungsten oxide, tungstate, tungsten carbide, tungsten rods, and tungsten strips.
Tungsten alloy powder is an alloy composed of tungsten as the base and other elements. It is an alloy with tungsten powder as the main raw material and nickel, iron, copper and other elements as auxiliary materials.
For purchasers, there are many problems that need to be paid attention to when ordering ferro-tungsten powder. In fact, the requirements for tungsten iron powder are relatively high when it is used.
With the advancement of electronic information industry technology, products are increasingly miniaturized, and the performance requirements of materials are getting higher and higher, and ordinary materials can no longer meet the needs.
For tungsten powder manufacturers, the current situation is quite difficult, because the powder purchase orders of cemented carbide enterprises are often priced with reference to raw materials.
Tungsten carbide powder has high purity, uniform particle size and good dispersion. It is an important raw material for the production of cemented carbide.
Tungsten carbide particles are a kind of metal carbide powder and an alloy powder. Tungsten carbide is the main raw material for the manufacture of cemented carbide, and it is also an important raw material for the preparation of high wear-resistant coatings in the field of thermal spraying.
Metal surface processing is a very common way in the current industrial production; the reason why metal surface processing is done is to enhance its quality, such as tungsten carbide for spraying used in metal surface hardness reinforcement pink.
Tungsten powder production plants have a very important position in the current market. For many industrial manufacturers, they are important partners in purchasing tungsten powder.
Recommended products
Powder:WC-12Ni
Preparation:Agglomeration and sintering
GRanularity(μm):45-15
Grade:JFGHWC40Ni
Total carbon T.C:3.7-3.96
Free carbon F.C:≤0.06
1. Tungsten powder has high purity, uniform particle size and good dispersion. It is an important raw material for the production of tungsten carbide powder
Tungsten carbide powder is the main raw material for processing cemented carbide and has more excellent properties.
2. Tungsten powder not only has high hardness, but also has the characteristics of wear resistance, corrosion resistance and high temperature resistance.
3. The melting point of tungsten is 3400 ºC. Boiling point 5555 ºC, insoluble in water, strong acid and alkali resistance.
4.The hardness of tungsten is the hardest among metals. The hardness of sintered tungsten rod is 200 ~ 250 and that of tungsten rod passing through rotary hammer is 350 ~ 400.
Sieving particle size: 60～325 mesh
Appearance: Granular, steel gray, with good fluidity. ,
Loose packing density: 7.3～8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size：>30μm
Molecular formula: W
Molecular weight: 183.85
Physical properties: a bright gray particles;
Chemical formula: FeW
Physical properties: the surface shall be smooth and clean, and the section and surface shall be free of significant non-metallic inclusions and rust spots.
Appearance: granular, steel gray, with good fluidity
Loose density: 7.3 ~ 8.9g/cm3
Compaction density: 9.0 ~ 10.5g/cm3
Hall flow rate: ≤ 12 S / 50g
Fischer particle size: > 30 μ m
Sintering temperature: 760 ~ 810 ℃
Hardness: 107 ~ 110 HRB
Chemical formula: WC
Physical properties: rigid gray metal powder.
Molecular formula: WO3
Molecular weight: 231.86
Specific gravity: 7.16g/cm3
Appearance: Light yellow triclinic powder crystals, light yellow heavy powder, which turns dark orange when heated, and restores its color when cold. When the temperature is higher than 740℃, it will transform into orange tetragonal crystals, which will return to the original state after cooling.
Chemical formula: eutectic, two-phase tungsten carbide (WC • W2C) WC
Appearance: dark gray powder, multi angular smooth particles.
Features: high temperature resistance, super wear resistance and impact resistance.
Molecular formula: WC-Co
Appearance: granular, steel gray, with good fluidity
Loose packing density: 7.3～8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size: >30μm
Powder:WC-12Ni
Preparation:Agglomeration and sintering
GRanularity(μm):45-15
Grade:JFGHWC40Ni
Total carbon T.C:3.7-3.96
Free carbon F.C:≤0.06
1. Tungsten powder has high purity, uniform particle size and good dispersion. It is an important raw material for the production of tungsten carbide powder
Tungsten carbide powder is the main raw material for processing cemented carbide and has more excellent properties.
2. Tungsten powder not only has high hardness, but also has the characteristics of wear resistance, corrosion resistance and high temperature resistance.
3. The melting point of tungsten is 3400 ºC. Boiling point 5555 ºC, insoluble in water, strong acid and alkali resistance.
4.The hardness of tungsten is the hardest among metals. The hardness of sintered tungsten rod is 200 ~ 250 and that of tungsten rod passing through rotary hammer is 350 ~ 400.
Sieving particle size: 60～325 mesh
Appearance: Granular, steel gray, with good fluidity. ,
Loose packing density: 7.3～8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size：>30μm
Molecular formula: W
Molecular weight: 183.85
Physical properties: a bright gray particles;
Chemical formula: FeW
Physical properties: the surface shall be smooth and clean, and the section and surface shall be free of significant non-metallic inclusions and rust spots.
Appearance: granular, steel gray, with good fluidity
Loose density: 7.3 ~ 8.9g/cm3
Compaction density: 9.0 ~ 10.5g/cm3
Hall flow rate: ≤ 12 S / 50g
Fischer particle size: > 30 μ m
Sintering temperature: 760 ~ 810 ℃
Hardness: 107 ~ 110 HRB
Chemical formula: WC
Physical properties: rigid gray metal powder.
Molecular formula: WO3
Molecular weight: 231.86
Specific gravity: 7.16g/cm3
Appearance: Light yellow triclinic powder crystals, light yellow heavy powder, which turns dark orange when heated, and restores its color when cold. When the temperature is higher than 740℃, it will transform into orange tetragonal crystals, which will return to the original state after cooling.
Chemical formula: eutectic, two-phase tungsten carbide (WC • W2C) WC
Appearance: dark gray powder, multi angular smooth particles.
Features: high temperature resistance, super wear resistance and impact resistance.
Molecular formula: WC-Co
Appearance: granular, steel gray, with good fluidity
Loose packing density: 7.3～8.9g/cm3
Tap density: 9.0~10.5g/cm3
Hall flow rate: ≤12 S/50g
Fisher particle size: >30μm
contact Hesiway
Mobile.186 6170 8309
Tel.86 0532 8481 9182
Address.Jihongtan Beiwan Industrial Park, Chengyang,District, Qingdao, Shandong, China
Fax.86 0532 8766 3689
Whatsapp.0086-177 5325 9059
Company homepage.www.hswmatel.com
Online Message
